Avalanche - RECCO Search Tool

The Recco Unit is designed to detect reflector chips attached to ski clothing or embedded in ski equipment. More information here.

Dan Corning demonstrating the Recco Unit
Dan Corning demonstrating the Recco Unit
Steve Case testing the Recco Unit
Steve Case testing the Recco Unit

RECCO® reflectors are not transceivers. They are thin, card-size units that are embedded by some manufacturers into ski products such as jackets, pants, boots, helmets—and even inside the Ortovox 3+ and S1+ transceiver models.

RECCO reflectors complement—but do NOT replace—the use of avalanche transceivers. These passive reflectors enhance the radio signals sent by the RECCO detector units used by many search-and-rescue organizations. This may mean quicker acquisition of a victim's position in an avalanche.

The RECCO system offers many benefits:

  • The reflector is a passive, battery-free device that requires no action or education on the part of the wearer.
  • It is imbedded in the gear, so it's likely to stay with the person buried in an avalanche.
  • When a signal is received, RECCO detectors lead the operator in a direct line to the victim. These signals can be picked up by either ground- or helicopter-based searchers.
  • RECCO signals are not related to, nor do they interfere with, transceiver searches, so both approaches can be used in the same area at the same time.

From REI


The RECCO® System

from RECCO AB

RECCO

Return to Previous Page